The limitations shown in Operating Limits are for
general use. The values may be more conservative for specific projects to
ensure the best performance and longest life of the membrane.
Notice: Permeate flow for individual element may vary +35 or -15
percent. Element is vacuum sealed in a polyethylene bag containing less than
1.0% sodium meta-bisulfite and 10% propylene glycol solution.Element is
supplied with interconnector.
- Permeate obtained from first hour of operation should be discarded.
- Avoid static permeate-side backpressure at all times.
- These membranes may be subject to drinking water application
restrictions in some countries: please check the application status
before use and sale.
- For element loading use only glycerine to lubricate o-rings and brine
seal
The customer is fully responsible for the effects of incompatible chemicals
on elements. The presence of free chlorine and other oxidizing agents will
cause membrane failure; the damage is not covered under warranty.
Oltremare believes the information and data contained herein to be accurate
and useful. The information and data are offered in good faith, but without
guarantee, as conditions and methods of use of our products are beyond our
control. Oltremare assumes no liability for results obtained or damages
incurred through the application of the presented information and data. It
is the user's responsibility to determine the appropriateness of Oltremare's
products for the user's specific end uses.
No performance warranties are given; all implied warranties of
merchantability or fitness for a particular purpose are expressly excluded.
Consult factory for detailed warranty information.
We reserve the right to modify or amend specifications without prior
notice.